Hondata

I have a 2013 civic si with Flashpro and I wanted to raise the launch RPM from 3500 to 5500. I have set the rpm in the calibration and I am using the newest firmware and software. I have saved multiple times while editing the calibration and its saved fine. The config also uploaded to the flashpro without any issues. I upload the config in my car and the launch RPM is still set to 3500. Any help would be appreciated.

Post the calibration as well as a datalog showing the issue.

Here is the calibration file. I will do a quick datalog and post that next

Here is the datalog file. Let me know if you need anything further.

Does your cruise control work as it should?

Yes it does

Have you tried adjusting it as it says in the help file: https://www.hondata.com/help/flashpro/l ... sub=launch

I don't know if it had to do with the fact that the cruise control was accidentally on but after I uploaded the calibration and disconnected the battery everything worked as expected. Once I reconnected the battery and went out on a test drive the launch control rpm was set properly. Thank you again for the help.