Page 1 of 1

injector dead times help 2200 cc dead time car wont rev pass 2k while on load

Posted: Tue Aug 02, 2022 3:38 pm
by Dtuned3
so recently put this build together ls vtec hondata 4 bar 2200cc bosch but ever since car wont go past 2k i recently created a topic and i was pointed i the direction that maybe my s300 had a bad internal battery (v1) i sent it out for the upgrade and now the car has the same issue just lest violent i was able to get a datalog of this but i personally think my dead times or my injector are the issues i have tried every dead time i can possibly find for the these bosch injectors the only this left would be to actually try with a different set of injectors any suggestions would gladly help thanks in advance

Re: injector dead times help 2200 cc dead time car wont rev pass 2k while on load

Posted: Tue Aug 02, 2022 4:05 pm
by Spunkster
You have not posted the calibration the datalog was made with.

Re: injector dead times help 2200 cc dead time car wont rev pass 2k while on load

Posted: Tue Aug 02, 2022 4:34 pm
by Dtuned3
this is the calibration

Re: injector dead times help 2200 cc dead time car wont rev pass 2k while on load

Posted: Tue Aug 02, 2022 4:50 pm
by Spunkster
You have the rev limit set at 2500rpm.