Page 1 of 1
car wont rev pass 2k while in gear but will stationary
Posted: Mon Jul 18, 2022 4:04 pm
by Dtuned3
car has a basic set up css ls vtev skunk 2 cams just recently switch over to Bosch 2200cc but car goes into like a decel mode and the datalog shows injector duty cycle go to 0ms car was working fine but no matter what deadtimes i use car has the same issue any help would be appreciated thank you
Re: car wont rev pass 2k while in gear but will stationary
Posted: Mon Jul 18, 2022 4:40 pm
by Spunkster
Post a picture of your s300.
Re: car wont rev pass 2k while in gear but will stationary
Posted: Mon Jul 18, 2022 6:23 pm
by Dtuned3
Here is the picture thanks
Re: car wont rev pass 2k while in gear but will stationary
Posted: Mon Jul 18, 2022 6:29 pm
by Dtuned3
This also happened the last time i took the car out trying to tune
Re: car wont rev pass 2k while in gear but will stationary
Posted: Tue Jul 19, 2022 9:02 am
by Spunkster
The internal battery has most likely failed. The only option is to upgrade to the version 4 s300. Details and the form can be found at:
https://www.hondata.com/downloads/s300v ... e_form.pdf
Re: car wont rev pass 2k while in gear but will stationary
Posted: Tue Jul 19, 2022 9:06 am
by Dtuned3
thank you sir