Page 1 of 1

Help needed on No start. Turbo d16y7

Posted: Sat Jul 16, 2022 4:39 pm
by Bberts90
Can someone please help me diagnose this 2 month long problem!
Car will crank and run very momentarily then die.
*Car will start and run when map in unplugged*

The car was originally running on crome with a chipped p06, car ran great for a good 30-40 miles on my first revision from tuner, out of the blue the car while just cruising stalls on me, cranks but wont run. Pull map sensor, car runs and idles ( obv not very well). Since then i have replaced the map sensor, plugs, dizzy and now have a s300 p06 i am running but still getting the same results.

Also, sensors psp,vtp and dist error are all on. Car does not have ps or vtec (d16y7)

Re: Help needed on No start. Turbo d16y7

Posted: Mon Jul 18, 2022 10:17 am
by Spunkster
There are no errors reported in the datalog and if you were pressing the throttle, thee was no TPS detected. You should try the ECU in a known running vehicle with their calibration.

Re: Help needed on No start. Turbo d16y7

Posted: Tue Jul 19, 2022 5:09 pm
by Bberts90
I've got the car up and running thank god, could someone please shed some light on hooking my aem wideband up ( part number 30-0310) ive got the red wire going to a25 black/brown going to a26 and white to d14 but am not showing any redings when the car is running.

Re: Help needed on No start. Turbo d16y7

Posted: Tue Jul 19, 2022 7:32 pm
by Bberts90
figured it out, brown wire to d22. working flawlessly.