Page 1 of 2
My Knock control keeps rising on every pull
Posted: Tue Jun 14, 2022 2:57 pm
by destinray26
I’m running the +9 psi and every time I do a pull my knock control goes up to 65-70 which I feel is not good. Anyone have any ideas or things I should check???
Re: My Knock control keeps rising on every pull
Posted: Tue Jun 14, 2022 3:05 pm
by Spunkster
What brand and octane fuel are you using?
Re: My Knock control keeps rising on every pull
Posted: Tue Jun 14, 2022 3:17 pm
by destinray26
Spunkster wrote: Tue Jun 14, 2022 3:05 pm
What brand and octane fuel are you using?
I use 91 from shell or chevron
Re: My Knock control keeps rising on every pull
Posted: Tue Jun 14, 2022 3:18 pm
by destinray26
destinray26 wrote: Tue Jun 14, 2022 2:57 pm
I’m running the +9 psi and every time I do a pull my knock control goes up to 65-70 which I feel is not good. Anyone have any ideas or things I should check???
I also have the skunk 2 ... dp and fp with the injen SRI
Re: My Knock control keeps rising on every pull
Posted: Tue Jun 14, 2022 3:33 pm
by Spunkster
Has it been tuned on the dyno?
Re: My Knock control keeps rising on every pull
Posted: Tue Jun 14, 2022 4:39 pm
by destinray26
Spunkster wrote: Tue Jun 14, 2022 3:33 pm
Has it been tuned on the dyno?
No just the tune on the flashpro is all that’s been done, stock calibration works fine so I’m thinking something might be off with the tune
Re: My Knock control keeps rising on every pull
Posted: Tue Jun 14, 2022 4:45 pm
by Spunkster
Post your calibration as well as a datalog showing the issue.
Re: My Knock control keeps rising on every pull
Posted: Tue Jun 14, 2022 10:42 pm
by destinray26
Spunkster wrote: Tue Jun 14, 2022 4:45 pm
Post your calibration as well as a datalog showing the issue.
Okay so this should be the tune I'm using along with a data log from earlier today. on the hondata app my knock control got up into the 70's. please help ive been having this problem for almost a year.
Re: My Knock control keeps rising on every pull
Posted: Tue Jun 14, 2022 11:34 pm
by destinray26
Spunkster wrote: Tue Jun 14, 2022 4:45 pm
Post your calibration as well as a datalog showing the issue.
Also my AFR seems a little off it says the target is 14.7 but on the app it drops down to 8-9 ish
Re: My Knock control keeps rising on every pull
Posted: Wed Jun 15, 2022 9:29 am
by Spunkster
The engine is not running in the 4 second datalog.
Re: My Knock control keeps rising on every pull
Posted: Wed Jun 15, 2022 10:31 am
by destinray26
Spunkster wrote: Wed Jun 15, 2022 9:29 am
The engine is not running in the 4 second datalog.
so sorry I sent the wrong data log this should be the right one
Re: My Knock control keeps rising on every pull
Posted: Wed Jun 15, 2022 11:16 am
by Spunkster
See if you get the same issue if you use a calibration that runs less boost.
Re: My Knock control keeps rising on every pull
Posted: Wed Jun 15, 2022 11:19 am
by destinray26
Spunkster wrote: Wed Jun 15, 2022 11:16 am
See if you get the same issue if you use a calibration that runs less boost.
Do you want me to turn off the optimized turbo response or switch to the +6 psi ?
Re: My Knock control keeps rising on every pull
Posted: Wed Jun 15, 2022 11:39 am
by Spunkster
Try the 6psi calibration
Re: My Knock control keeps rising on every pull
Posted: Wed Jun 15, 2022 12:14 pm
by destinray26
Spunkster wrote: Wed Jun 15, 2022 11:39 am
Try the 6psi calibration
okay so this should be the +6 psi calibration and i got a data log