Page 1 of 2
UKDM PRA Civic Type R, Hondata app won't read boost pressure past 11.2 PSI
Posted: Mon May 09, 2022 3:18 am
by jw338
Hoping someone has a solution to this issue. App works great apart from occasionally refusing to connect without app restart. The issue I'm having is that the boost pressure display reads perfect till it reaches 11.2 psi, then it pegs there till you let off. Kpro v4 logs are reading perfectly fine, boost on current setting peaks and holds at 15.2~ psi. Confirmed with a friend's external gauge temporarily plumbed into my car.
Any ideas how I can resolve this?
Thanks in advance
Re: UKDM PRA Civic Type R, Hondata app won't read boost pressure past 11.2 PSI
Posted: Mon May 09, 2022 9:08 am
by Spunkster
What MAP sensor are you using?
Re: UKDM PRA Civic Type R, Hondata app won't read boost pressure past 11.2 PSI
Posted: Wed May 18, 2022 3:35 pm
by jw338
It's a Hondata 4 Bar
Re: UKDM PRA Civic Type R, Hondata app won't read boost pressure past 11.2 PSI
Posted: Wed May 18, 2022 3:35 pm
by jw338
Has been selected as such in the map sensor drop down box
Re: UKDM PRA Civic Type R, Hondata app won't read boost pressure past 11.2 PSI
Posted: Wed May 18, 2022 4:13 pm
by Spunkster
Post your calibration and a datalog showing the issue.
Re: UKDM PRA Civic Type R, Hondata app won't read boost pressure past 11.2 PSI
Posted: Thu May 19, 2022 4:35 am
by jw338
I'll do so once I'm home with the laptop. Map sensor reads accurate with no issues on the logs. just stops reading at 11.2 PSI on the app. Even if you watch the live data on ''display'' tab in the laptop software while accelerating, it climbs past 11.2 psi to it's peak and the app follows along until this point. Very annoying, as the app is great otherwise!
Re: UKDM PRA Civic Type R, Hondata app won't read boost pressure past 11.2 PSI
Posted: Thu May 19, 2022 5:36 am
by jw338
please find attached a datalog and calibration
Re: UKDM PRA Civic Type R, Hondata app won't read boost pressure past 11.2 PSI
Posted: Thu May 19, 2022 9:36 am
by Spunkster
What is the version of the app you are using?
Re: UKDM PRA Civic Type R, Hondata app won't read boost pressure past 11.2 PSI
Posted: Thu May 19, 2022 10:56 am
by jw338
Version 1.6.9
Re: UKDM PRA Civic Type R, Hondata app won't read boost pressure past 11.2 PSI
Posted: Fri May 20, 2022 3:32 pm
by Spunkster
What settings to you have set for that sensor in the app?
Re: UKDM PRA Civic Type R, Hondata app won't read boost pressure past 11.2 PSI
Posted: Sat May 21, 2022 1:16 pm
by jw338
Here, see attached
Screenshot_20220521-211535.png
Re: UKDM PRA Civic Type R, Hondata app won't read boost pressure past 11.2 PSI
Posted: Wed May 25, 2022 3:37 am
by jw338
Any ideas what the issue could be?
Re: UKDM PRA Civic Type R, Hondata app won't read boost pressure past 11.2 PSI
Posted: Fri May 27, 2022 10:30 am
by Hondata
Is this the android or ios app?
Re: UKDM PRA Civic Type R, Hondata app won't read boost pressure past 11.2 PSI
Posted: Fri May 27, 2022 10:34 am
by jw338
Android app
Re: UKDM PRA Civic Type R, Hondata app won't read boost pressure past 11.2 PSI
Posted: Wed Jun 08, 2022 1:52 am
by jw338
Any further ideas on what I can try? I'd like to get this problem resolved.
Thank you