Page 1 of 7
please help
Posted: Sat Apr 23, 2022 1:08 pm
by chocolateman
hey everyone, I just got my flashpro and I have uploaded completely stock calibration and i am seeing a lot of knock. is that normal (fake knocks) or should I do something about it.
the only mod I have is hasport rear engine mount.
thanks
Re: please help
Posted: Sat Apr 23, 2022 6:39 pm
by chocolateman
EFICU, i would appreciate your help :D
2011 civic si runs on 91 octane
Re: please help
Posted: Sat Apr 23, 2022 7:20 pm
by EFICU
Yeah it definitely has too much timing in a lot of areas. I put together a quick file for you to get started and hopefully get you out of the issues you're having. We can work on it some more, but for now, take this for a twenty minute datalog and get at least one third gear WOT pull from 2500-8600 so we can see the WOT fueling.
Chocolateman.Hybrid.Rev01 (Blended)(Vtec4800).fpcal
Re: please help
Posted: Sat Apr 23, 2022 10:01 pm
by chocolateman
Thank you for replying:)
Will try it tomorrow and let you know
Re: please help
Posted: Sun Apr 24, 2022 1:52 am
by chocolateman
hey EFICU,
here's 20 min drive
Re: please help
Posted: Sun Apr 24, 2022 10:15 am
by EFICU
Not too bad for a start, I went in and made some fuel and ignition adjustments as necessary. I also lowered vtec down to 4500, I think that might be a better fit to help get it out of the hole on those third gear pulls. Take this one for a spin when you can, same datalog and driving style.
Chocolateman.Hybrid.Rev02 (Blended)(Vtec4500).fpcal
Re: please help
Posted: Sun Apr 24, 2022 12:59 pm
by chocolateman
alright will try right now
Re: please help
Posted: Sun Apr 24, 2022 2:20 pm
by chocolateman
here's 15 min drive
Re: please help
Posted: Sun Apr 24, 2022 6:37 pm
by EFICU
It looks like I didn't save that last calibration properly, I changed the vtec RPM but it didn't save the fuel and ignition adjustments. Sorry about that, take this one for a drive when you can. We'll see how this one looks, it should be much closer now in this revision.
Chocolateman.Hybrid.Rev03 (Blended)(Vtec4500).fpcal
Re: please help
Posted: Sun Apr 24, 2022 10:27 pm
by chocolateman
that's a quick drive
Re: please help
Posted: Sun Apr 24, 2022 11:29 pm
by EFICU
Definitely looks a lot better now that the changes saved. Sorry about that, I made some more adjustments to the WOT fueling and some minor MAF scaling for the part throttle. Still chasing a little bit of knock, but we'll keep working on it. Take this one for a spin when you can, same datalog and driving style.
Chocolateman.Hybrid.Rev04 (Blended)(Vtec4500).fpcal
Re: please help
Posted: Mon Apr 25, 2022 3:59 pm
by chocolateman
had some fun with this run :)
Re: please help
Posted: Mon Apr 25, 2022 6:41 pm
by EFICU
It looks really good. I made a couple 1-2% adjustments to sooth my OCD, other than that it's pretty much there. We'll see how this one looks. For this next one, I added a different pedal map which control the relationship between the pedal and throttle body. See what you think on this one, we can always go back to my base pedal map. Take it for a spin and we'll see how it looks.
Chocolateman.Hybrid.Rev05.1 (Blended)(Vtec4500)(SPort).fpcal
Re: please help
Posted: Mon Apr 25, 2022 10:42 pm
by chocolateman
car feels good with the new adjustment
Re: please help
Posted: Tue Apr 26, 2022 4:46 pm
by EFICU
That's good. We're just about there, but some knock popped up. So I made some adjustments for that, everything else looked solid. Take this one for a drive when you can.
Chocolateman.Hybrid.Rev06 (Blended)(Vtec4500)(Sport).fpcal