Hondata

Hello,

I flashed my ECU last week using the "Civic Turbo 1.5 2022, tuned, 93 octane" setting on the CARB version.

Please let me know if I'm missing something as I'm unsure where the settings for these modes are stored? If nowhere, which settings are active for the additional gains in HP and TQ ??

Is it only in SPORT mode? my apologies as I can only tell by my "butt" dyno and getting acclimated to using Hondata.

Thanks for any assistance!

They are in the calibration window in the Torque section.

It allows you to alter the torque setting in ECON mode.

Spunkster, thanks for the reply!

I didn't dig down far enough to even see that.

Next question I have "Econ button boost (Hondata mode) enabled" checked off in the blue box.

This means if it's in Econ mode I'm running the stock levels? Normal and Sport mode means I'm getting the additional boost from the flash update?

Thanks again!

that correct, or you can alter the torque values to your liking for the different modes.