Hondata

I have an S300 that has a blinking red D2 and a green D4 and the ECU is in limp home mode.

I tried the S300 in another ECU and the problem persists.
I tried another S300 in the failing ECU and it works fine so I'm pretty sure the issue is with the S300

I can ERASE the S300 and the result is successful.
I can upload a new calibration but it does it really fast and does not exit limp home mode.
If I download the newly created calibration after uploading it the tables are blank.

Please let me know if I need to send in the S300 for diagnosis/repair and the cost.

Thanks!

What is the serial number that is on the s300?

S300v3 #57656

From Help, About, what is the version of software you are using?

SManager v 2.7.8.0

Is J12 cut on the ECU?

Yes - that's the first thing I checked

Send and email to support<at> hondata.com with the following and I will issue an RMA and give you further
instructions:

Name:
Address:
Phone:
Email:
Serial#:
Description of problem:

include a link t this thread.

Done - tks!