Hondata

Hi All,
My car is 2021 CIVIC 1.5T MT Hactchback bought in China,and I successfully to locked vin number with LVHFK7797M60338984 But I am only able to use canada calibration, and canada's calibration was flashed successful but with no turbo Presser. when i back to factory setting the turbo is good working Please tell me did I got a wrong settings? or the problem is caused by VIN identifying with wrong region?
How to fix the problem? THX!

With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.

THX for reply!Iill try it tomorrow.

Spunkster wrote: Tue Mar 15, 2022 11:03 am With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.

I have sended the feedback.how long about any responding?can I move my vehicle now?

Your ECU came with the 37805-5AF-C410 binary. That's Canadian but we have seen that in Chinese vehicles occasionally.

If you are not making boost after a reflash then start diagnosing the problem but making datalogs and posting them here and also telling us if there are any error codes. The problem is not from the ECU identification because it worked ok once you returned to stock with the same 37805-5AF-C410 binary.

Hondata wrote: Wed Mar 16, 2022 8:23 am Your ECU came with the 37805-5AF-C410 binary. That's Canadian but we have seen that in Chinese vehicles occasionally.

If you are not making boost after a reflash then start diagnosing the problem but making datalogs and posting them here and also telling us if there are any error codes. The problem is not from the ECU identification because it worked ok once you returned to stock with the same 37805-5AF-C410 binary.

THX for reply
Here is datalogs
one for Civic 1.5T canada 2020 Hatch MT - Civic-Turbo-MT-2018-2-Tuned-High This is for factory calibration When I finished reflash it just only ACC LAKS and some auto drive system warning.They disappear a few seconds after the engine started

I noticed that BP CMD is aways 0 but the factory calibration is not

Hondata wrote: Wed Mar 16, 2022 8:23 am Your ECU came with the 37805-5AF-C410 binary. That's Canadian but we have seen that in Chinese vehicles occasionally.

If you are not making boost after a reflash then start diagnosing the problem but making datalogs and posting them here and also telling us if there are any error codes. The problem is not from the ECU identification because it worked ok once you returned to stock with the same 37805-5AF-C410 binary.

EXM Is there any clues or progress？I tried everything I could. they are all useless.

Spunkster wrote: Tue Mar 15, 2022 11:03 am With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.

Is ther any way to reflash another calibration？

Please update your FlashProManager to the version release today and it will fix the no boost problem.

Hondata wrote: Tue Mar 22, 2022 7:01 pm Please update your FlashProManager to the version release today and it will fix the no boost problem.

Booster working good.no error code.It seem everythings OK.I am very grateful！
BTW TPedal maximun 85%.There is nothing under the pedal.is that normally?

Good. As long as the throttle plate gets to 100% then it is ok.

fuzzyqin wrote: Thu Mar 24, 2022 5:55 am

Hondata wrote: Tue Mar 22, 2022 7:01 pm Please update your FlashProManager to the version release today and it will fix the no boost problem.

Booster working good.no error code.It seem everythings OK.I am very grateful！
BTW TPedal maximun 85%.There is nothing under the pedal.is that normally?
TPedal maxmun 85%.png
booster OK.png

wo shi guo ren，jia wo jiao liu

xiplus wrote: Fri Mar 25, 2022 9:03 am

fuzzyqin wrote: Thu Mar 24, 2022 5:55 am

Hondata wrote: Tue Mar 22, 2022 7:01 pm Please update your FlashProManager to the version release today and it will fix the no boost problem.

Booster working good.no error code.It seem everythings OK.I am very grateful！
BTW TPedal maximun 85%.There is nothing under the pedal.is that normally?
TPedal maxmun 85%.png
booster OK.png

wo shi guo ren，jia wo jiao liu

wo ye shi , jia wo weixin akira_queen123