Page 1 of 1
flashpro locked ecu in recovery mode
Posted: Wed Mar 09, 2022 11:48 am
by perezbrittany19
I have a 15 si with an rbc runnin 410 injectors. after blowing my fuel pump the car wouldnt start but my flashpro locked and the ecu is in recovery mode, ive tred to disconnect battery and i have the latest software. Ive tried to reset ecu but the software isnt letting me do anything. how can i unlock my flashpro?
Re: flashpro locked ecu in recovery mode
Posted: Wed Mar 09, 2022 12:02 pm
by Spunkster
If the ECU is in recovery mode then you must upload a calibration to the ECU to get it out of recovery mode. Please see the help file:
https://www.hondata.com/help/flashpro/e ... b=recovery
Re: flashpro locked ecu in recovery mode
Posted: Wed Mar 09, 2022 2:40 pm
by perezbrittany19
Am i uploading it from my PC ? I am going to try to upload the same calibrations the flahspro currently has
Re: flashpro locked ecu in recovery mode
Posted: Wed Mar 09, 2022 2:59 pm
by Spunkster
You must upload from the laptop/PC to the ECU.
Re: flashpro locked ecu in recovery mode
Posted: Sun Mar 13, 2022 3:54 pm
by perezbrittany19
The upload button is greyed out and I cannot click or upload anything
Re: flashpro locked ecu in recovery mode
Posted: Mon Mar 14, 2022 10:43 am
by perezbrittany19
who can i contact to help unlock my flashpro?
Re: flashpro locked ecu in recovery mode
Posted: Mon Mar 14, 2022 11:50 am
by Spunkster
From Help, About, what is the version of software you are using?
What is the serial number on your FlashPro?
With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.
Re: flashpro locked ecu in recovery mode
Posted: Mon Mar 14, 2022 12:15 pm
by perezbrittany19
I am using the latest software Flashpro 3.9.0
My serial number is FP-2012si-113686
Re: flashpro locked ecu in recovery mode
Posted: Mon Mar 14, 2022 9:11 pm
by perezbrittany19
I have tried to send feedback 3 times and each time says program error and doesn’t let me send anything
Re: flashpro locked ecu in recovery mode
Posted: Tue Mar 15, 2022 10:02 am
by Spunkster
IT sounds like something is blocking internet access. If you have antivirus software or internet protection software try disabling or uninstalling it.