Hondata

i have dw 265 fuel pump, rdx 410cc injectors, invidia n1 3in catback, ktuned 3.5 sri behind the headlight (might run a vstack through the headlight in the near future), rbc ported for zdx, zdx throttle body, i really need a basemap because hondata doesnt provide one for everything that i have until i can afford to get a dyno if anyone can help thanks

What year is your 9th gen? Either way, there will be some tuning required to get it dialed for you and your setup. But let me know what year it is and we can go from there.

2012 si

Okay. Unfortunately I don't have any basemaps for that, we would have to go in and do a complete tune on it for you. It would take around 10-12 revisions to get it dialed. We would have to go in and tune each cam angle one by one and blend it all out it why it takes so many revisions.

anything just to get me back on my feet please

Okay. I’ll get one put together and post it in the morning.

thank you so much

Okay, for datalogs we need them to be in the twenty minute range with as much stop and go driving as possible. On the drive, we need one wide open throttle (WOT) pull in third gear from 2500-7500. Keep the driving normal and calm for this first datalog so we can gather some data. Then we'll go from there and see how it goes. This one will be the 0* cam angle with vtec at 4500. The 0* cam angle is the least powerful, so don't get discouraged if it doesn't feel strong.

okay ill see if i can make it tomorrow my coupler broke for my intake lol tryna see where i can get one today since its sunday

It's always something with these cars, haha. Just keep me in the loop.

will do thanks

so its been a week and still couldnt find anywhere that sells 3in to 3.5 couplers so i had to order one and spend another week without the car should get here friday ima let you know for the datalogs

Run and idle test using this calibration.