Hondata

Hello
My PC died in the first 5s of the upload. Now my flashpro gives a driver error when inicialized.
Windows says Code 10 - hardware cant be inicialized
FlashPro Manager wont update firmware and wont recognize the FP. Cant re-upload, there is no calibration in the FP.
FP Manager version 3.8.6.0
Serial FP-SI-US-12291
2007 Civic Si

Code 10 is a windows driver problem. The FlashPro is probably ok.

First, unplug the FlashPro from both the vehicle and USB and plug it back into the laptop via USB. It should appear in the Windows Device Manager otherwise you'll have to re-install the USB drivers, which varies depending on what version Windows you are using.