Datalog help
Posted: Mon Dec 13, 2021 4:34 pm
Was wondering if any one on here can help with a tune. Just reflashed my ECU with Flashpro as
I returned it to stock in the Summer due to some Limp mode issues that never came back on stock tune and need some guidance and assistance if possible moving forward.
2018 Civic Touring CVT - Added the Civic Turbo CVT 2016, +6 psi high octane basemap with optimized turbo response, Stage 2 increased throttle response (CVT), Standard throttle sensitivity on the installed boxes checked.
I'm running the AFE Takeda Momentum Intake, Throttle body spacer, Mihimoto Baffled Oil Catch Can, RV6 Catted exhaust/Frontpipe and a Boomba Blow off Valve.
Looking at my datalog, AF ratio seems rich 14 to 29, averaging about 14.8.
How do I go about correcting this? Any suggestion how I can go about making this tune ideal for my setup?
Attached is my datalog
https://drive.google.com/file/d/1julHMb ... sp=sharing
Thanks in advance.
I returned it to stock in the Summer due to some Limp mode issues that never came back on stock tune and need some guidance and assistance if possible moving forward.
2018 Civic Touring CVT - Added the Civic Turbo CVT 2016, +6 psi high octane basemap with optimized turbo response, Stage 2 increased throttle response (CVT), Standard throttle sensitivity on the installed boxes checked.
I'm running the AFE Takeda Momentum Intake, Throttle body spacer, Mihimoto Baffled Oil Catch Can, RV6 Catted exhaust/Frontpipe and a Boomba Blow off Valve.
Looking at my datalog, AF ratio seems rich 14 to 29, averaging about 14.8.
How do I go about correcting this? Any suggestion how I can go about making this tune ideal for my setup?
Attached is my datalog
https://drive.google.com/file/d/1julHMb ... sp=sharing
Thanks in advance.