Hondata

Still have an issue with a "Check System" warning coming up on the dash.
I have disabled VSA & ELD. It appears to happen as soon as I move off.

Thank for any help.

Bones126 wrote: Fri Jul 30, 2021 5:20 am Still have an issue with a "Check System" warning coming up on the dash.
I have disabled VSA & ELD. It appears to happen as soon as I move off.

Thank for any help.

There are no error/fault codes stored.

What vehicle? For most vehicles you cannot disable VSA without generating an error.

Hondata wrote: Fri Jul 30, 2021 6:56 am What vehicle? For most vehicles you cannot disable VSA without generating an error.

Euro FN2 2007
It was happening before disabling the VSA.

Thanks.

If you datalog with both USB's connected, what errors are there?

Thanks, I’ll give it a go.

Spunkster wrote: Mon Aug 02, 2021 8:59 am If you datalog with both USB's connected, what errors are there?

Hi Still getting the system error come up about 5-10 seconds after starting the car and being stationary. I can't find any fault codes.
I have also fitted a new battery, so know that's not the issue.

You say both USB connections, I take it you mean connected to the Flashpro and then the traction control unit? If so, I have checked for errors doing that.

To confirm, the issue only started once fitting the traction control unit.

thanks
Dave

Please post your calibration and datalogs made with both USB's connected showing when this happens.