Page 1 of 1
Skunk2 70mm Exhaust, Takeda Intake
Posted: Sun Jul 25, 2021 2:59 pm
by fa5matt
I was wondering if there is any calibrations I can use besides the stock tuned basemap, I daily my car about 40 minutes a day from work and I don't wanna blow up anything on the way or hurt my motor while at it.... I know it's best for me to get a tune but our peak season is here and there is a lot of over time so I really don't have the time to drive to the nearest tuner which is 1hr half from me
Skunk2 70mm Exhaust & Takeda Stage 2
Re: Skunk2 70mm Exhaust, Takeda Intake
Posted: Sun Jul 25, 2021 6:23 pm
by CalibratEd
Post the calibration you are currently running and a datalog of normal driving. I can look it over to see how the car is running.
-Ed
Re: Skunk2 70mm Exhaust, Takeda Intake
Posted: Wed Jul 28, 2021 1:37 am
by fa5matt
Sorry it took so long waited until I drove to work
Just using the all stock tuned, the one that hondata provides
Re: Skunk2 70mm Exhaust, Takeda Intake
Posted: Wed Jul 28, 2021 7:09 am
by CalibratEd
Please post the calibration file you are running. You have not provided information on what vehicle you have so I would not like to assume what calibration file you are using.
-Ed