Skunk2 70mm Exhaust, Takeda Intake

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
fa5matt
Posts: 8
Joined: Sun Jul 25, 2021 2:40 pm

Skunk2 70mm Exhaust, Takeda Intake

Post by fa5matt »

I was wondering if there is any calibrations I can use besides the stock tuned basemap, I daily my car about 40 minutes a day from work and I don't wanna blow up anything on the way or hurt my motor while at it.... I know it's best for me to get a tune but our peak season is here and there is a lot of over time so I really don't have the time to drive to the nearest tuner which is 1hr half from me

Skunk2 70mm Exhaust & Takeda Stage 2
User avatar
CalibratEd
Posts: 1674
Joined: Fri Feb 07, 2020 3:20 pm
Contact:

Re: Skunk2 70mm Exhaust, Takeda Intake

Post by CalibratEd »

Post the calibration you are currently running and a datalog of normal driving. I can look it over to see how the car is running.

-Ed
Instagram: calibrated.tuning
fa5matt
Posts: 8
Joined: Sun Jul 25, 2021 2:40 pm

Re: Skunk2 70mm Exhaust, Takeda Intake

Post by fa5matt »

Sorry it took so long waited until I drove to work
Just using the all stock tuned, the one that hondata provides
You do not have the required permissions to view the files attached to this post.
User avatar
CalibratEd
Posts: 1674
Joined: Fri Feb 07, 2020 3:20 pm
Contact:

Re: Skunk2 70mm Exhaust, Takeda Intake

Post by CalibratEd »

Please post the calibration file you are running. You have not provided information on what vehicle you have so I would not like to assume what calibration file you are using.

-Ed
Instagram: calibrated.tuning
Post Reply