Hondata

Whe i press the acceleration suddently the car starts starts to kick and the power lowers and it dosnt do it everytime . After 10 minutes of driving it dosnt kick anymore.I changed the fuel pump, changed the distribution, sparkplugs,induction coils and the car has no errors.
I accept everysingle comment or opinion because im strggling with this problem for 8 months at least
Thanks !

- serial number of your FlashPro:
- FlashPro Manager version (i have the hondata flash pro manager 3.7.5.0)
- the calibration (My last calibration was in 01.04.2020)
- a datalog of a problem( i dont really know what is the problem because it has no error code) i can give u guys an video how to car is bumping
- what sort of vehicle you have honda civic type r fk2 2015
- what sort of ECU you are using bosch
- anything about the car which has been modified from stock which may affect the ECU (don't include what sort of rims you have nor stereo etc).I didnt change anything that is electric . I only changed the complete exhaust, eventurly complete air filter, radiator, intercooler, and turbo.
- a specific description of the problem: The car has interuption betwenfrom 3000 rpm and 7000rpm. I changed the sparplugs for 3 times thinking that is the problem in 8 months.
Im going to attach my last ma that i have on my car

I only changed the complete exhaust, eventurly complete air filter, radiator, intercooler, and turbo.

That's some fairly major changes to the engine - does that include the AFM and/or intake?

There is a lot of fuel trim - both long and short term. I think that for a start getting the fuel trims right would help.

I havent changed any sensor or the intake gallery.
I will send u another recording
And my flash pro serial number is FP-FK2-INT-190071

Fuel trims are better in the second datalog. Now tell me where in the datalog the problem is and perhaps describe the problem more fully.

Whell the car works well until 3500rpm but after the car fells like it has pauses when i send it full.
I want to change the knock sensor and the sparplugs again and if it dosnt work i will change the injectors aswell.