Page 1 of 1
When the RPMs increase, a warning appears.
Posted: Wed May 12, 2021 9:50 pm
by Lass
I am using Civic Turbo MT 2017,+3 psi.
I just changed all the other settings as per the instructions, but when I rev in gear 2, all the warnings show up.
If anyone has any ideas as to what might be causing this, I'd love to hear from you!
Thanks!
Re: When the RPMs increase, a warning appears.
Posted: Thu May 13, 2021 6:47 am
by Hondata
What warnings do you mean?
Re: When the RPMs increase, a warning appears.
Posted: Thu May 13, 2021 10:34 am
by Spunkster
Have you datalogged and checked for error codes?
Re: When the RPMs increase, a warning appears.
Posted: Fri May 14, 2021 4:06 am
by Lass
I'm sorry. I didn't use the right words.
All the warning lights are glowing.
If I rewrite the ECU again, it goes back to normal, but if I rev it to about 5000 rpm again, all the warning lights light up.
Re: When the RPMs increase, a warning appears.
Posted: Fri May 14, 2021 10:25 am
by Spunkster
You must datalog and check for error codes when this happens.
Re: When the RPMs increase, a warning appears.
Posted: Tue Aug 17, 2021 1:35 am
by 540999115@qq.com
When the stock VSC system can not effectively stabilize the car （include tire skipping，sliding）all the alarm lights will on.
You just need to turn off and restart the car，drive normally and strightly for about 1~2km，the lights will off.
You can select "disable VSA" in the mods.