Hondata

at wot i cant get past 4500 rpm on about half or so i cant get past 4500 rpm i attached the data log and calibration

It appears to be related to VTEC engaging. Check your grounds, especially the thermostat housing ground.

Spunkster wrote: Tue May 04, 2021 10:41 am It appears to be related to VTEC engaging. Check your grounds, especially the thermostat housing ground.

yeah man all grounds are good i have the grounds at the thermostat along with the coil on plug ground there also
in was thinking vtec related i have powered the solenoid and it sound like it is working maybe i take it off and check if its blocked up with gunk , ill try also to disable vtec to see if problem is still there

Post pictures of all the grounds in the engine bay.

Did we ever figure this problem out. My h22a keeps cutting out at wot at 4500rpm.

BoostedLude96 wrote: Sat May 15, 2021 3:53 pm Did we ever figure this problem out. My h22a keeps cutting out at wot at 4500rpm.

no not yet i did a new map and just reposted a new map file and data log

BoostedLude96 wrote: Sat May 15, 2021 3:53 pm Did we ever figure this problem out. My h22a keeps cutting out at wot at 4500rpm.

It was my tune file I found a basemap file from a user on here used his file and set it up for what I'm running and car pulls strong now

What was the cause though?