Page 1 of 1

RPM Cycle Between 1100 and 1400 while coasting to a stop

Posted: Sat Mar 27, 2021 8:19 pm
by vuho72
Please help. I just updated FlashPro to version 3.7.4.0 with "Civic Si Turbo MT 2017, high octane tuned +6 PSI". The issue is that the RPM would rise and fall between 1100 and 1400 while I coast in neutral to a stop. Once the car stops, the RPM would rest at 750. Also, when I'm in 2nd gear with zero throttle traveling at 10mph, the car would add gas to go up to 13mph. I have attached the calibration file and also a datalog file. Check out time stamp 1:50 to 2:05 in the datalog file. Thanks in advance for the help.

Re: RPM Cycle Between 1100 and 1400 while coasting to a stop

Posted: Sun Mar 28, 2021 5:43 am
by Hondata
Set the throttle sensitivity lower.

Re: RPM Cycle Between 1100 and 1400 while coasting to a stop

Posted: Sun Mar 28, 2021 5:30 pm
by vuho72
Thanks, I will try it at setting #1. If that doesn't work, then I guess I will have to stay with the standard Honda setting.