Page 1 of 1
D2 light flashing red
Posted: Thu Feb 04, 2021 10:51 pm
by Anthony111
So I recently just finished installing an s300v3 into my p28 and when I plugged it Into the laptop d2 flashes red. It loads up calibrations fine. When I start the car and turn data logging on by pressing the yellow lightning bolt it gives me some real time data, but the d2 continues to flash red. What does this mean?
Re: D2 light flashing red
Posted: Fri Feb 05, 2021 5:28 am
by Hondata
That LED indicates communication the S300 and ECU. eg when datalogging Next time I'll only put green LEDs on the board.
Re: D2 light flashing red
Posted: Fri Feb 05, 2021 2:05 pm
by DaX
Hondata wrote: Fri Feb 05, 2021 5:28 amNext time I'll only put green LEDs on the board.
LoL
Re: D2 light flashing red
Posted: Fri Feb 05, 2021 3:09 pm
by Anthony111
How do I do that?
Re: D2 light flashing red
Posted: Sat Feb 06, 2021 9:02 am
by Hondata
It's normal. Your S300 is fine.
Re: D2 light flashing red
Posted: Sat Feb 06, 2021 9:03 am
by Anthony111
Okay thanks man.