Hondata

Help please,

Please tell me how to install the correct calibration for my vehicle. The TCM was recently changed, and as per your board, it is clear I need to install the 2017 calibration now that the dealer flashed the firmware after changing the TCM.

When I select Model 'Civic 1.5T (2016+)' my options for available vehicles include a bunch of options, none of which match exactly to a 2017 version of an EX-T coupe. Regardless, I choose the 'Civic 1.5T US 2017 Hatch CVT', I then chose the Calibration, Name: 'Civic-Turbo-2016-2-Tuned-High' and Description: 'Civic Turbo CVT 2016, +6 psi high octane' - but received this message when trying to upload...

You cannot upload a 'Civic 1.5T US Hatch LX CVT' calibration to a Civic 1.5T 2016 CVT' FlashPro.

Please help me to find and load the correct calibration for my issue and how to get my FlashPor to accept it, thanks.

-Greg

Are you opening the calibration with the FlashPro plugged in?

Why are you loading a hatch calibration when you have a coupe?

Set the vehicle to 'Civic 1.5T US 2016-2017 CVT' and then load a calibration.

I did load the 2016-2017 calibration after sending my original post, that worked. After driving for a day I ended up getting the U0301 code, I cleared the code and it unsurprisingly came back the next. Can you please tell me how to adjust the calibration to prevent this code? I live in Portugal and am using E5 95 octane Galp gasoline, so I am not sure about ethanol content, but I believe it to be 5% ethanol.

Any help would be appreciated as the U301 code lights up most of the diagnostic lamps, thanks.

I think you'd better tell us exactly what the ECU part number is and what the stock calibration id was, and then show us a screen shot of what you're trying to load. Feedback would work too.