Hondata

V3.6.5 (3 Oct 2020)

• FlashPro firmware updated to version 188
• Allow some modifications to be used with new CARB calibrations
• [2011-2014 TSX] Added support for the 2013-2014 AT model RL5-A631
• [2016+ Turbo Civic] Added support for Singapore 2019 model 5AG-SF1 and Europe 2018 5AN-E72
• [2017+ FK8 Civic Type R] Added support for 5BF-U12

Download here

Before update I was able to start a new calibration on my laptop, save it and just upload it to the flashpro in the car. But after updating to the new beta version the only thing that shows up is the model and when I click the drop down menu for the vehicle it's blank?

Nvm i had to plug it in to flashpro and update the firmware to new version and also update the tunes saved with the previous version

Customer reported to me - after firmware update:
> Upload of new ECU calibration is not possible anymore to the flashpro box

License and ECU VIN is 1:1

Error message:
This is not the vehicle the FlashPro was locked to.

Do you want us to help? If so, provide some information.

Customer is informed to send information to you.

... I will perform the firmware upgrade today to see if I have the same issue on my FP too.

How do we know who the customer is?

Hondata wrote: Sat Oct 03, 2020 7:17 pm V3.6.5 (3 Oct 2020)

• FlashPro firmware updated to version 188
• Allow some modifications to be used with new CARB calibrations
• [2011-2014 TSX] Added support for the 2013-2014 AT model RL5-A631
• [2016+ Turbo Civic] Added support for Singapore 2019 model 5AG-SF1 and Europe 2018 5AN-E72
• [2017+ FK8 Civic Type R] Added support for 5BF-U12

Download here

请问旧版本的校准怎么才可以上传到车辆
How can the calibration of the old version be uploaded to the vehicle

Hondata wrote: Sat Oct 03, 2020 7:17 pm V3.6.5 (3 Oct 2020)

• FlashPro firmware updated to version 188
• Allow some modifications to be used with new CARB calibrations
• [2011-2014 TSX] Added support for the 2013-2014 AT model RL5-A631
• [2016+ Turbo Civic] Added support for Singapore 2019 model 5AG-SF1 and Europe 2018 5AN-E72
• [2017+ FK8 Civic Type R] Added support for 5BF-U12

Download here

The software before 3.4.4 can't be used, and the program I modulated can't be uploaded to ECU. At present, there is no dynamometer to carry out the new self-made program, I need to use the old version of software to upload the program. In addition, I am a Chinese user, so it may be difficult to communicate with each other.

You must use the most recent version of software.

Hondata wrote: Thu Oct 08, 2020 8:09 am How do we know who the customer is?

I have dropped all information via email to you. Customer is informed to perfom the feedback...

On my Flashpro the firmware update for this beta was successful.

When i check the update, it shows there is a new software. Then i click the update, it downloads the data and it stops nothing happening anything. Did i miss something?

Download from here https://www.hondata.com/software

Hondata wrote: Sat Oct 03, 2020 7:17 pm V3.6.5 (3 Oct 2020)

• FlashPro firmware updated to version 188
• Allow some modifications to be used with new CARB calibrations
• [2011-2014 TSX] Added support for the 2013-2014 AT model RL5-A631
• [2016+ Turbo Civic] Added support for Singapore 2019 model 5AG-SF1 and Europe 2018 5AN-E72
• [2017+ FK8 Civic Type R] Added support for 5BF-U12

Download here

What is new for the CARB calibration? I didn't see any changes in the calibration section.