Page 1 of 2
Since new update can’t upload a tune
Posted: Tue Sep 01, 2020 7:26 pm
by Sayanythng
2020 type r jail broken sent the ecu in been using the 91 octane tune before the latest beta update now I cannot upload a new tune with the updated setting Honda type r 2017+ is the only option I get this error
Re: Since new update can’t upload a tune
Posted: Tue Sep 01, 2020 7:32 pm
by Sayanythng
I believe is issue is you guys don’t yet have an updated model configuration so what do the 2020 guys do now?
Re: Since new update can’t upload a tune
Posted: Tue Sep 01, 2020 8:07 pm
by Sayanythng
Update: Tried reinstalling still no luck
Re: Since new update can’t upload a tune
Posted: Wed Sep 02, 2020 9:25 am
by Hondata
Close the calibration then re-open the calibration with the FlashPro plugged in.
Re: Since new update can’t upload a tune
Posted: Wed Sep 02, 2020 9:26 am
by Spunkster
Make sure you have the FlashPro plugged in with the ignition in the on position when opening a calibration and it should work.
Re: Since new update can’t upload a tune
Posted: Wed Sep 02, 2020 11:00 am
by Sayanythng
Spunkster wrote: Wed Sep 02, 2020 9:26 am
Make sure you have the FlashPro plugged in with the ignition in the on position when opening a calibration and it should work.
Flash pro plugged in to Laptop. New calibration configured. Plugged flash pro into car from laptop With ignition on. Same error
Re: Since new update can’t upload a tune
Posted: Wed Sep 02, 2020 11:22 am
by Spunkster
post your calibration.
Re: Since new update can’t upload a tune
Posted: Wed Sep 02, 2020 3:51 pm
by Sayanythng
Spunkster wrote: Wed Sep 02, 2020 11:22 am
post your calibration.
Re: Since new update can’t upload a tune
Posted: Wed Sep 02, 2020 4:44 pm
by Spunkster
not a picture of the new calibration window. We need you to post the actual calibration you are using.
Re: Since new update can’t upload a tune
Posted: Wed Sep 02, 2020 5:19 pm
by Sayanythng
Spunkster wrote: Wed Sep 02, 2020 4:44 pm
not a picture of the new calibration window. We need you to post the actual calibration you are using.
I can’t post one because The flash pro is cleared I’m trying to upload a new calibration.....
First picture shows what
what’s flashed on the ecu
Second pic shows Nothing on the flash pro
Re: Since new update can’t upload a tune
Posted: Wed Sep 02, 2020 5:24 pm
by Hondata
We have fixed this issue and are doing another release now.
Re: Since new update can’t upload a tune
Posted: Wed Sep 02, 2020 5:26 pm
by Sayanythng
Here’s the old calibration but is the one I’m using. I reopened it. And it will download to my pro I just can’t do a new calibration because I get promoted the error
Re: Since new update can’t upload a tune
Posted: Wed Sep 02, 2020 5:30 pm
by Sayanythng
Hondata wrote: Wed Sep 02, 2020 5:24 pm
We have fixed this issue and are doing another release now.
Ok in the next week? Since I have you here the highest octane fuel I have already at the fuel pumps is 92 octane. I notice when I select 92 the drop down says Mexico us 17-18. Is that possible elevation would be the reason for the octane should I try that calibration?
Re: Since new update can’t upload a tune
Posted: Wed Sep 02, 2020 5:45 pm
by Hondata
I'd use a 91 octane calibration for US 92. Where do you still get 92 octane?
Release will be done today.
Re: Since new update can’t upload a tune
Posted: Wed Sep 02, 2020 5:54 pm
by Sayanythng
Hondata wrote: Wed Sep 02, 2020 5:45 pm
I'd use a 91 octane calibration for US 92. Where do you still get 92 octane?
Release will be done today.
Oregon only haS 92 octane from the pump no 93 available