Hondata

Hi,

Need some advise if possible, How come during WOT, my AF CMD is 11.08 but the sensor is A/F of 10.52?

Is it the stock 02 sensor not accurate as its not wideband? Or need adjust some settings? Here a screenshot. Any expert opinion would be useful. Thank you

Because the ECU is in open loop, so it will not adjust the AF to match the target. And also the WOT adjustment table is not a target table.

You'll find that after a reflash it will take some driving but eventually will run in closed loop all the time apart from when the injectors are cut.

If you see a difference from target to actual the first thing to look at is the AFM calibration.