Hondata

Hi!
I have buy an 06 Accord swamped J35A8. In the glovebox we have seen a flashpro kit so we try to flash the ECU and now, the car doesn't want to start... It crank but no start. All fuse are good, the car battery is at 11.68v. The weirdest this is green key symbol appear in the cluster.
Never I have get any problem with the car but for now I don't know what to do. I have try to plug the flash pro module into laptop and on the left lower corner only the ECU is with an red X. The other condition are all in green.
In the laptop software one error code appears if this can help you. My flashpro software version is: V3.6.1
My flash pro serial is: FP-TL-140355

You can see in the upload line I have problem... What can I do for make working again my car??
Thanks for your help

With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.

Thanks for the answer. Friday I will send you feedback. I'm not at home for the week.

I have send my feedback do you have receive it?

we replied to the email that was sent.

I have see nothing in my mailbox for junkbox can you please reply again to my feedback at this mail address please? (tonka_26@icloud.com)
Thanks