Page 1 of 2
Blinking leds
Posted: Thu Jul 16, 2020 8:11 am
by antkouv
I updated both the Manager and the flashpro today. When I connect the flashpro to the car the power, program and datalog lightS on the flashpro blink. This is top urgent as I am on a 2 day track day. Please reply to
antony@kouvelas.net if needed.
Re: Blinking leds
Posted: Thu Jul 16, 2020 8:15 am
by antkouv
Re: Blinking leds
Posted: Thu Jul 16, 2020 9:20 am
by Spunkster
From Help, About, what is the version of software that you are using?
Re: Blinking leds
Posted: Thu Jul 16, 2020 9:28 am
by antkouv
It is the lateat one (not the beta though). I just updated today.
Re: Blinking leds
Posted: Thu Jul 16, 2020 9:29 am
by antkouv
3.6.2.0
Re: Blinking leds
Posted: Thu Jul 16, 2020 10:01 am
by Spunkster
With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.
Re: Blinking leds
Posted: Fri Jul 17, 2020 6:36 am
by Hondata
Plug the FlashPro into the laptop first, then into the vehicle.
Re: Blinking leds
Posted: Fri Jul 17, 2020 7:25 am
by antkouv
Done this already. Same issue.
Re: Blinking leds
Posted: Fri Jul 17, 2020 9:43 am
by Spunkster
Unplug the FlashPro form the USB and the vehicle, close the FlashPro manager program, then reopen FlashPro manager. Now plug in just the USB. IT should update the firmware. Wait until this finishes, then plug it in to the vehicle and see if that works.
Re: Blinking leds
Posted: Fri Jul 17, 2020 9:48 am
by antkouv
The firmware has been updated already. Have you checked the info I sent through the e-mail? Is there a newer version?
Re: Blinking leds
Posted: Fri Jul 17, 2020 10:27 am
by Spunkster
What is the serial number that is on the FlashPro?
Re: Blinking leds
Posted: Fri Jul 17, 2020 11:14 am
by antkouv
I will check tomorrow and let you know.
Re: Blinking leds
Posted: Fri Jul 31, 2020 12:11 pm
by antkouv
Sorry for the delay but the flashpro was in the car, being transported back home from Nurburgring. The serial is FP-S2K-INT-40205
Re: Blinking leds
Posted: Fri Jul 31, 2020 12:41 pm
by Spunkster
The firmware does not appear to have been updated. With only the USB plugged in, open the Newest version of FlashPro manager from our website and it should update the firmware automatically. Do not have the FlashPro connected to the vehicle when doing this.
Re: Blinking leds
Posted: Fri Jul 31, 2020 1:09 pm
by antkouv
I reinstalled Flashpro Manager from your website. THe firmware was not updated. THis is what I see.