Hondata

We have +6 PSI basemap high octane calibration. I understand there is no lower octane calibration for the +6 PSI as the additional boost is higher than stock.

In contrast, +3 PSI calibration has no high octane option.

Could we have +3 PSI calibration in the next update of the firmware?

If you use higher octane fuel on the +3 psi the ECU will adjust the knock control down automatically.

Hondata wrote: Sun May 31, 2020 7:30 am If you use higher octane fuel on the +3 psi the ECU will adjust the knock control down automatically.

Thank you for the explanation.