Hondata

Hi
I downloaded first calibration to test the car. I took from Flashpro base calibration FK2 Europe with factory settings and I saw VTS always off in first datalog.
Is it a channel address problem or a real VTEC issue? The car seems ok driving it and no DTC
Thanks for your patience

What version of the software did you upload with? Did you upload Factory settings or Return to Stock?

I used version 3.5.8 and I uploaded factory settings calibration, NOT return to stock

Car seems ok. I suppose if VTEC is really always OFF I'd feel the car not pushing at high revs.

I'll check it is datalogging the VTS correctly.

Be aware that VTEC does not work like other vehicles on the FK2 & FK8. VTEC will switch on at idle and cruise sometimes, then generally on for spool, then off and perhaps on at high rpm.