Page 1 of 1
B16A2 Turbo calibration/ Tune Request (stock motor/ Drag kit)
Posted: Thu Feb 13, 2020 11:33 am
by Do1313R
Hey guys,
I’ve tried to search and look at the stock calibrations and couldn’t find anything that fits my request. I did see the stock B16A with the Greddy kit, however the kit is an 18G with stock injectors.
My setup goes as followed:
Motor:
Completely stock B16A2
Turbo:
Drag 3 Kit T3/T4 with inter-cooler ect(its for a b16a2)
38MM wastegate (7PSI spring)
Fuel:
440cc saturated injectors
Stock B16A2 fuel pump/rail/FPR
ECU:
S300 (do I need boost mod)
Can anyone provide a tune/ calibration for this setup?
Let me know if you need any more info or if I missed anything.
Thanks,
Re: B16A2 Turbo calibration/ Tune Request (stock motor/ Drag kit)
Posted: Wed Feb 19, 2020 7:36 pm
by CalibratEd
Do1313R wrote: Thu Feb 13, 2020 11:33 am
Hey guys,
I’ve tried to search and look at the stock calibrations and couldn’t find anything that fits my request. I did see the stock B16A with the Greddy kit, however the kit is an 18G with stock injectors.
My setup goes as followed:
Motor:
Completely stock B16A2
Turbo:
Drag 3 Kit T3/T4 with inter-cooler ect(its for a b16a2)
38MM wastegate (7PSI spring)
Fuel:
440cc saturated injectors
Stock B16A2 fuel pump/rail/FPR
ECU:
S300 (do I need boost mod)
Can anyone provide a tune/ calibration for this setup?
Let me know if you need any more info or if I missed anything.
Thanks,
What brand are the injectors? What map sensor are you running? I can help if you can provide data-logs. Does the car have a wideband?
Re: B16A2 Turbo calibration/ Tune Request (stock motor/ Drag kit)
Posted: Fri Feb 21, 2020 4:24 pm
by Do1313R
CalibratEd wrote: Wed Feb 19, 2020 7:36 pm
Do1313R wrote: Thu Feb 13, 2020 11:33 am
Hey guys,
I’ve tried to search and look at the stock calibrations and couldn’t find anything that fits my request. I did see the stock B16A with the Greddy kit, however the kit is an 18G with stock injectors.
My setup goes as followed:
Motor:
Completely stock B16A2
Turbo:
Drag 3 Kit T3/T4 with inter-cooler ect(its for a b16a2)
38MM wastegate (7PSI spring)
Fuel:
440cc saturated injectors
Stock B16A2 fuel pump/rail/FPR
ECU:
S300 (do I need boost mod)
Can anyone provide a tune/ calibration for this setup?
Let me know if you need any more info or if I missed anything.
Thanks,
What brand are the injectors? What map sensor are you running? I can help if you can provide data-logs. Does the car have a wideband?
The car doesnt have a wideband yet. Im waiting to install the kit.
Re: B16A2 Turbo calibration/ Tune Request (stock motor/ Drag kit)
Posted: Sun Feb 23, 2020 9:34 am
by CalibratEd
Do1313R wrote: Fri Feb 21, 2020 4:24 pm
CalibratEd wrote: Wed Feb 19, 2020 7:36 pm
Do1313R wrote: Thu Feb 13, 2020 11:33 am
Hey guys,
I’ve tried to search and look at the stock calibrations and couldn’t find anything that fits my request. I did see the stock B16A with the Greddy kit, however the kit is an 18G with stock injectors.
My setup goes as followed:
Motor:
Completely stock B16A2
Turbo:
Drag 3 Kit T3/T4 with inter-cooler ect(its for a b16a2)
38MM wastegate (7PSI spring)
Fuel:
440cc saturated injectors
Stock B16A2 fuel pump/rail/FPR
ECU:
S300 (do I need boost mod)
Can anyone provide a tune/ calibration for this setup?
Let me know if you need any more info or if I missed anything.
Thanks,
What brand are the injectors? What map sensor are you running? I can help if you can provide data-logs. Does the car have a wideband?
The car doesnt have a wideband yet. Im waiting to install the kit.
Ok more can get done once you have the wideband connected. For now what map sensor are you using and what brand are your injectors?
Re: B16A2 Turbo calibration/ Tune Request (stock motor/ Drag kit)
Posted: Mon Feb 24, 2020 3:11 pm
by Do1313R
CalibratEd wrote: Sun Feb 23, 2020 9:34 am
Do1313R wrote: Fri Feb 21, 2020 4:24 pm
CalibratEd wrote: Wed Feb 19, 2020 7:36 pm
What brand are the injectors? What map sensor are you running? I can help if you can provide data-logs. Does the car have a wideband?
The car doesnt have a wideband yet. Im waiting to install the kit.
Ok more can get done once you have the wideband connected. For now what map sensor are you using and what brand are your injectors?
PM'd