Page 1 of 1

B18c gsr skunk2 pro2

Posted: Thu Feb 06, 2020 4:28 am
by JekoB18c
Need help my car has

410 rdx injector
Skunk2 pro 2 cams
Supertech valve ,spring,retainers
Type r manifold and throttle body

Idle is so rough and rich
Sparkplugs are really black
When i press the gas it will rev up but the rpm will drop till 200 to 400 almost stall.
When warm up idle will be really rough
Please help

Re: B18c gsr skunk2 pro2

Posted: Thu Feb 06, 2020 10:28 am
by Spunkster
Has this been properly tuned on the dyno?

Re: B18c gsr skunk2 pro2

Posted: Thu Feb 06, 2020 4:02 pm
by JekoB18c
No not yet but i cannot drive my car to the dyno it always dies out ..1 time i tried to drive it and it dies out and it really hard for me to start it

Re: B18c gsr skunk2 pro2

Posted: Thu Feb 06, 2020 4:24 pm
by Spunkster
See if your tuner can provide you with a basemap that runs it better, or you may want to consider towing it to the tuner to get properly tuned.

Re: B18c gsr skunk2 pro2

Posted: Fri Feb 07, 2020 4:14 pm
by CalibratEd
Do you have a wideband on the car? I can help get the car running.

Re: B18c gsr skunk2 pro2

Posted: Sat Feb 08, 2020 4:59 am
by JekoB18c
I think we found the problem we put the exhaust cam gear on -3 degrees instead of +3 degrees.i hope i dont have bent valve