Hondata

Blips in ecu car will read fine, but blips randomly and shows the ecu going crazy. I've attached a picture of what it does when It blips

Here is my map and datalog

Check the ecu grounds in the engine harness, and any other grounds you can find.
Make sure you are using Resister spark plugs (R in the plug part number, like BKR7E).
If you have a jumper harness, it may be of bad quality and have a bad wire somewhere.

Post a picture of the bottom of the ECU showing the solder joints for the ECU socketing.

It's done with rosin core solder

I'm thinking it may be a bad wire in the jumper harness, I discovered if you more the ecu the car almost dies.

That sounds very likely.

I'm getting a new one this week. I'll update you if it fixes the issue

The jumper harness has seemed to fix the issue. Thank you guys for the help.