Hondata

I recently installed the Traction Control unit on my turbo h23 VTEC honda prelude and have attached here a data log. I would appreciate any input folks may have on how the unit is responding to overslip conditions. Everything seems to be working correctly; I can certainly tell the ECU is responding with rev limits and timing retard. I'm curious from more experienced users of TC if there are fine tuning tips.

I'm running a target slip of 6%. My take away from the datalog is that I'm oscillating around that target a bit too much; swinging from 8-10% overslip down to 0%. I'm wondering what changes I should try to get the overslip to remain in the 4-8% range. Thanks in advance for any input.

Forgot to attach *.tcc file associated with the previously posted datalog (datalog is in the *.zip file) and ECU file.

For the benefit of others, I have attached here an updated *.tcc file along with my ECU calibration and a datalog in the zip file showing performance. These settings in the *.tcc file seem to work much better; less jerky with correcting slip events.