Hondata

Hi Hondata,

My car is currently tuned (non-Hondata), i have since bought a flash-pro to enable my car to be tuned with Hondata.

Is there an easy way to ensure that my ECU is Jail-broken / ready to take a Hondata tune.

Car is a 2015 FK2

Regards
David

You can try to use the FlashPro and if it does not work then it must not be jailbroken.

Spunkster wrote: Mon May 06, 2019 9:59 am You can try to use the FlashPro and if it does not work then it must be jailbroken.

Thank you for your reply. I can datalog with the Flash Pro is this enough to confirm? or should i try to upload a calibration. I am unsure of the calibration is on the ECU but do not want to loose it until i have a tuning session arranged.

Regards

Hi Hondata again,

I tried uploading the stock calibration and failed due to the ECU not being jail-broken which confirms my original question. However when it has failed it has put the ECU in recovery mode.

In the help files it says to re-upload the calibration however i cant due to the ECU not being Jail Broken. I have left the Battery disconnected whilst i go to bed to hopefully rectify this.

Any other advice?

Return the ECU to stock.

Hondata wrote: Tue May 07, 2019 11:07 am Return the ECU to stock.

Hi Hondata, Just for the closure of this thread, returning the ECU back to stock resolved the problem. Many thanks for your help.

I have same problem here with an FK8, how to return the ECU to stock?

Go to the online menu and click on return to stock.