Page 1 of 1
19 civic si, upload 2 calibration at same time?
Posted: Fri Apr 12, 2019 6:50 pm
by xsq123
Hi, i just bought the flashpro for civic si.
is it possible to simultaneously upload 2 calibrations? what im trying to do is to have a +6psi for regular mode and +9psi for sport mode. is it possible or uploading a second calibration will just overwrite the previous?
Re: 19 civic si, upload 2 calibration at same time?
Posted: Fri Apr 12, 2019 8:41 pm
by EFICU
xsq123 wrote: Fri Apr 12, 2019 6:50 pm
Hi, i just bought the flashpro for civic si.
is it possible to simultaneously upload 2 calibrations? what im trying to do is to have a +6psi for regular mode and +9psi for sport mode. is it possible or uploading a second calibration will just overwrite the previous?
Someone else from Hondata will need to confirm. But from what I've read this is not a possibility right now.
Re: 19 civic si, upload 2 calibration at same time?
Posted: Sat Apr 13, 2019 7:49 am
by Hondata
Sorry, there is nothing pre-made, but under Torque if you lower the non-sport made torque table and don't check 'Sport button boost', then you can get lower boost in non-sport mode. If you check 'Sport button boost' then you'll get stock boost in non-sport mode.
I'm guessing you'll want torque values around 240-280 Nm to get +6 psi but it will take some trial.
Re: 19 civic si, upload 2 calibration at same time?
Posted: Sat Apr 13, 2019 1:41 pm
by xsq123
EFICU wrote: Fri Apr 12, 2019 8:41 pm
xsq123 wrote: Fri Apr 12, 2019 6:50 pm
Hi, i just bought the flashpro for civic si.
is it possible to simultaneously upload 2 calibrations? what im trying to do is to have a +6psi for regular mode and +9psi for sport mode. is it possible or uploading a second calibration will just overwrite the previous?
Someone else from Hondata will need to confirm. But from what I've read this is not a possibility right now.
thx!
Re: 19 civic si, upload 2 calibration at same time?
Posted: Sat Apr 13, 2019 1:42 pm
by xsq123
Hondata wrote: Sat Apr 13, 2019 7:49 am
Sorry, there is nothing pre-made, but under Torque if you lower the non-sport made torque table and don't check 'Sport button boost', then you can get lower boost in non-sport mode. If you check 'Sport button boost' then you'll get stock boost in non-sport mode.
I'm guessing you'll want torque values around 240-280 Nm to get +6 psi but it will take some trial.
thx! i will try to do it this way.