Hondata

Hi all ,
Im new to this forum and this is my first post, im currently building a Frank k20z4(head)/k24a3(block) for my fn2. I need a base map so i can bed my piston rings in before getting it proper tuned.
It's specs are :

k24a3 block bored to 87.5mm
omega forged pistons 12:5.1 compression ratio
brain crower forged sportsman rods
Oem bearings and bolts
rrc oil pump
rrc sump with baffle
all new oem valves +guides
beehive valve springs with retainers
brain crower stage 3 cams
rrc intake manifold
cpl racing big bore cai
tegiwa header
rdx 440 injectors
walbro 225 fuel pump

I would be very grateful for any advise thanks

Hi,
I have successfully tuned a frank engine like yours.
If you are interested for pricing for tune and calibration /pm me

Hi,

Please update me if we can tune the car remotely, I live in Israel.
My car is type R FN2
Engine is K24 with K20 head
forged pistons 12.5:1 ratio.
forged connecting rods and bearing
440 cc injectors
headers (no catalitic)
OEM intake and throttle.
OEM camshafts

vafner@gmail.com
What is the cost of tuning it properly.

typer86 wrote: Tue Apr 16, 2019 2:21 am Hi,
I have successfully tuned a frank engine like yours.
If you are interested for pricing for tune and calibration /pm me

Hi typer86 im new here


I read that you have tuned a k20z4/k24a3 fn2 im wondering if it was a succes nice/grear power and what the parts spec are.. as im planning to make my fn2 also k20z4/k24a3.. i cant send private msg because im new

I only tuned the car - not fitted the hardware.