Page 1 of 1
K20a typer JDM base Map
Posted: Tue Dec 18, 2018 5:14 pm
by Tqtr
Hi
Need a base map for the following setup
Car- Civic 1996
Engine - k20a type R JDM
Short Intake custom 3 inch
Fuel rail k-tuned
Injectors- 310cc stock
Fuel- 91 octane
Fuel pump- Walbro 255LPH
Header- k-tuned swap header
Exhaust - 76mm skunk 2 mega power
Thank you in advance
Re: K20a typer JDM base Map
Posted: Mon Jul 06, 2020 3:52 pm
by spacesi
did you ever get this?
Re: K20a typer JDM base Map
Posted: Sat Oct 17, 2020 9:41 am
by BrianJewell1988
There is a base map provided by HONDATA for very close to this exact setup.
Under PRB->RSX Type S->"k20a-itr"
This is a dyno tuned JDM DC5R K20A map for a car with the usual I/H/E. Depending on if your running an RBC/RRC, etc ypu may be able to squeeze a bit more top end or midrange out of it but it's a very good starting point.
Re: K20a typer JDM base Map
Posted: Mon Dec 06, 2021 6:18 am
by 6nfanatic
BrianJewell1988 wrote: Sat Oct 17, 2020 9:41 am
There is a base map provided by HONDATA for very close to this exact setup.
Under PRB->RSX Type S->"k20a-itr"
This is a dyno tuned JDM DC5R K20A map for a car with the usual I/H/E. Depending on if your running an RBC/RRC, etc ypu may be able to squeeze a bit more top end or midrange out of it but it's a very good starting point.
Hey, i am looking for that as well. But i couldnt find the calibration in the vault you mentioned.
Would you kindly upload it somewhere? Thanks!