Page 1 of 1
Use of Flashpro for 2017 Civic 1.5L Turbo in Australia
Posted: Mon Jan 01, 2018 4:36 pm
by d.sound
Hi there,
I did read a response to a question on whether the Flashpro could be used to a Civic in Australia which was posted in Aug 2017. You had stated that at the time it was unavailable. Would the device be compatible for the Civic Turbo in Australia now?
Re: Use of Flashpro for 2017 Civic 1.5L Turbo in Australia
Posted: Mon Jan 01, 2018 5:22 pm
by Hondata
We support some of the Oz vehicles - it depends on the ECU calibration. If you get the ECU part number (37820-5xx-Qxx) then we can see if it is supported. Note that sometimes the ECU part number does not match the calibration so we can't say for certain if an ECU is supported, but almost any OBDII scanner can find the calibration ID which will give a definitive answer.
Re: Use of Flashpro for 2017 Civic 1.5L Turbo in Australia
Posted: Mon Jan 01, 2018 9:43 pm
by d.sound
Where could I find the ECU part number?
Re: Use of Flashpro for 2017 Civic 1.5L Turbo in Australia
Posted: Mon Jan 01, 2018 10:06 pm
by d.sound
Apologies. I found the ECU part number and it is 37820-5AG-S83. I believe this is supported? Thanks
Re: Use of Flashpro for 2017 Civic 1.5L Turbo in Australia
Posted: Tue Jan 02, 2018 1:42 pm
by Spunkster
Yes it is supported.
Re: Use of Flashpro for 2017 Civic 1.5L Turbo in Australia
Posted: Tue Jan 16, 2018 4:17 am
by xenon04
Hi there,
I have EU 2017 civic 4 door 1.5T, manual transmission - engine code L15BB (134kW)
my ECU part number - 37820-5AW-G42 is not supported :(
is there any solution?
Re: Use of Flashpro for 2017 Civic 1.5L Turbo in Australia
Posted: Tue Jan 16, 2018 10:00 am
by Hondata
Check back from time to time or follow the FlashPro release notes
https://www.hondata.com/help/flashpro/whatsnewtopic.htm as we may support the ECU in the future.
Re: Use of Flashpro for 2017 Civic 1.5L Turbo in Australia
Posted: Wed Jan 17, 2018 12:40 am
by xenon04
Hondata: OK, thanks for the link ;)