B18C1 EK CEL #6 (ECT Fault)
Posted: Fri Nov 10, 2017 10:51 pm
Good day,
i have a 98 Civic hatchback with B18C1 swapped in it. I'm having a CEL #6 right now, and its killing me. Because of this ECT error, my car is difficult to start, idles like shit, drives like shit, VTEC is non existance.
1) i changed the sensor (the correct one, the one that send the signal to the ECU) but still doesnt fix the issue.
2) I used multimeter on the plug, it seems normal.
3) i measured resistance of the new sensor, reads normal
4) measured the grounding at Thermostat housing, reads 22V +/-
before this, i had TPS and IAT sensor fault too (input too high). But i managed to clear the faults.
Anyone can help me with the ECT error?
i have a 98 Civic hatchback with B18C1 swapped in it. I'm having a CEL #6 right now, and its killing me. Because of this ECT error, my car is difficult to start, idles like shit, drives like shit, VTEC is non existance.
1) i changed the sensor (the correct one, the one that send the signal to the ECU) but still doesnt fix the issue.
2) I used multimeter on the plug, it seems normal.
3) i measured resistance of the new sensor, reads normal
4) measured the grounding at Thermostat housing, reads 22V +/-
before this, i had TPS and IAT sensor fault too (input too high). But i managed to clear the faults.
Anyone can help me with the ECT error?