Page 1 of 1
Using a 07-08 5AT ECU in a 03-06 6MT
Posted: Wed Sep 27, 2017 3:27 pm
by MrHeeltoe
If a person uses a 5AT 07-08 ECU in their older TL or accord 6MT, will they lose the reverse lockout?
Marcus
Re: Using a 07-08 5AT ECU in a 03-06 6MT
Posted: Wed Sep 27, 2017 4:03 pm
by Spunkster
Not that I am aware of. The thing that is lost is the cruise control.
Re: Using a 07-08 5AT ECU in a 03-06 6MT
Posted: Mon May 07, 2018 7:32 pm
by Uncledaves
Just a quick question about using a AT ECM in my 05TL 6MT.
From reading forums and notes, I have come to the conclusion that in order to use the Flash pro, I need the TL Adaptor harness setup, including the CAN wiring, and then a 07-80 TL ECM. There seems to be a complete lack of used 6MT Tl ecus in the marketplace.
If I use a At 07-08 ECM, I understand the cruise wont work, but Is there a work around for this?
Are there any tuning issues with running a AT ECM in a MT car?>
Looking to tune my J32a motor stroked to 3.7L and need a tuning answer.
Dave
Re: Using a 07-08 5AT ECU in a 03-06 6MT
Posted: Tue May 08, 2018 10:28 am
by Spunkster
Re: Using a 07-08 5AT ECU in a 03-06 6MT
Posted: Tue May 08, 2018 8:04 pm
by Uncledaves
Thanks,.. i was pretty sure it would work, but wanted a professional opinion.
thanks
Dave