Page 1 of 2
When updating to version 2.6.6.0 does not allow UPLOAD;
Posted: Thu Jul 13, 2017 9:44 am
by Danny Meza
Please help
I have a program in update 2.4.8.0
When updating to version 2.6.6.0 does not allow UPLOAD;
Message appears: "This is a Race Calibration,Which does not support new features and have inconsistent fuel gauge readings. It is recomemmended to user regular calibrations".
Does not allow program upload (MAP based, expanded tables for boss)
Re: When updating to version 2.6.6.0 does not allow UPLOAD;
Posted: Thu Jul 13, 2017 9:51 am
by Spunkster
That is not the current version of software. Please download the current version from the software section of the website:
https://www.hondata.com/software
Race calibrations do not support the new features. IF you want the new features you must use the current version of software and use a non-race calibration.
Re: When updating to version 2.6.6.0 does not allow UPLOAD;
Posted: Thu Jul 13, 2017 4:08 pm
by Danny Meza
thank you very much
How can I use Race calibrations
Re: When updating to version 2.6.6.0 does not allow UPLOAD;
Posted: Thu Jul 13, 2017 4:38 pm
by Spunkster
You can use them as you have, but no new features will be added to them.
Re: When updating to version 2.6.6.0 does not allow UPLOAD;
Posted: Fri Sep 22, 2017 3:28 pm
by Danny Meza
Dear Sirs
I paid for two calibrations,
worked until updated 2.4.8.0
Now I can not load them
I would like to have a solution or update the calibrations for your new Hondata update.
Since this is your updates issue
I await your prompt reply
https://drive.google.com/open?id=0B9Y8j ... ThJY0t5WXM
https://drive.google.com/open?id=0B9Y8j ... WM5UDBBQXM
email
dmeza@tecsup.edu.pe
Re: When updating to version 2.6.6.0 does not allow UPLOAD;
Posted: Fri Sep 22, 2017 4:02 pm
by Jun43
upload the calibration directly to here
attach it to your post
Re: When updating to version 2.6.6.0 does not allow UPLOAD;
Posted: Fri Sep 22, 2017 4:45 pm
by Spunkster
post the actual calibrations, we cannot download from your links.
Re: When updating to version 2.6.6.0 does not allow UPLOAD;
Posted: Mon Sep 25, 2017 12:43 pm
by Danny Meza
Dear Sirs, I send you the program, thank you for your help and prompt reply.
Re: When updating to version 2.6.6.0 does not allow UPLOAD;
Posted: Mon Sep 25, 2017 1:01 pm
by Hondata
These are 'Race' calibrations, but upload ok here. When you say it does not upload, what do you mean? Are you getting an error code or message?
Re: When updating to version 2.6.6.0 does not allow UPLOAD;
Posted: Mon Sep 25, 2017 3:27 pm
by Danny Meza
Message appears: "This is a Race Calibration,Which does not support new features and have inconsistent fuel gauge readings. It is recomemmended to user regular calibrations".
Re: When updating to version 2.6.6.0 does not allow UPLOAD;
Posted: Mon Sep 25, 2017 3:58 pm
by Spunkster
That is not saying that you cannot use or upload it. It is just saying that if you want to use the new features you cannot use a race type calibration.
Re: When updating to version 2.6.6.0 does not allow UPLOAD;
Posted: Tue Sep 26, 2017 9:04 am
by Danny Meza
When I charge the program the vehicle fails and does not follow the programmed, and does not revolutionize more than 6000 RPM, the lounch limiter is at 6500 and is activated at 5500
It is fatal
Re: When updating to version 2.6.6.0 does not allow UPLOAD;
Posted: Tue Sep 26, 2017 9:09 am
by Danny Meza
with the previous version it worked without problems
Re: When updating to version 2.6.6.0 does not allow UPLOAD;
Posted: Tue Sep 26, 2017 10:26 am
by Hondata
We have not changed anything with the race calibrations for some time. What is the exact problem? A rev limiter? Can you make a datalog of the problem?
Re: When updating to version 2.6.6.0 does not allow UPLOAD;
Posted: Tue Sep 26, 2017 10:47 am
by Danny Meza
if they are and the brevity I send