Hondata

Hi,

I need to know the deadtime values for rc440 injectors?


thanks

If you contact RC and give them the model number they should be able to give you the correct dead times for them. There have been several different models of 440's over the years.

Hi

I just contact the RC and here the value

Now how do i change
Which values ​​do I have to change?

Please can help me

You must put in the values for the fuel pressure you are running.

Hi,


I have the OEM psi pressure. But I do not know how much?
Can you help me

After adjusting the deadtime of the injector I will have to help also the air fuel?

Will it be important to change the deadtime of the injector?

I have until today I have used the original deadtime with RC440 injectors

What vehicle is this in?

In a civic typer ep3 k20a2

I'm not sure what the stock fuel pressure is in that vehicle since it was not sold here in the US. You may have to contact the Honda dealer, or look for the technical information.

Hi


Look for the technical information and says 47-54 PSi !!

Please tell me if i adjustment the deadtime , saw a adjustable the air fuel on all tables?


Thanks

Please show me how to adjust the value?

Regards

Do not have any answer?

Open the calibration, find the injector dead time table and enter the correct info and upload to the ECU.

Ok thanks but tell me if I have to change the A/F in all tables?

You may have to once you have the correct dead times entered.