Hondata

Does anyone have a map that's similar to my set up?

• 
  B20v
  fully built Gsr head
  Blox type b
  cams Super tech valve train dual Springs retainers..
  Machined head shaved
  intake side ported
  Skunk 2 pro mani Thermo tb gasket
  Skunk 2 tb (70mm)
  Inline pro fuel rail
  blox fpr
  RC 440's

BLOCK
B20b block
84.5 Ycp type r pistons
Stock rods
arp bolts

This should be sufficient for a start up and daily. I would advise you to get a tune or adjust afr to be on point. Timing map is more on the conservative side. Let me know how it do and if you need anymore help.

Zperformance wrote:This should be sufficient for a start up and daily. I would advise you to get a tune or adjust afr to be on point. Timing map is more on the conservative side. Let me know how it do and if you need anymore help.

WILL DO! Thank you! I'll keep you updated!

You do have wideband right? Make sure afr are good

I have no wideband :[

You would want to get a widebamd before driving the car. Overall did the basemap able to start the car and idle fine?

No, sadly it wouldn't stay on and im tuning in a week, would it be necessary?

Would it idle and die or wont crank up?

Idle and die, but stays on when I keep giving it gas

Check your timing with, timing gun. Since you dont have wideband cant narrow down to the problem.