Page 1 of 1
Honda Accord 2014 V6 EX-L ECU Number
Posted: Wed Sep 28, 2016 3:36 pm
by HalifaxAccord
Hi,
I have a Honda Accord 2014 V6 EX-L. I read your instructions for the FlashPro computer and located my ECU part number, mine is "a36" which I do not see listed on the Hondata FlashPro Manager software. Can you please advise how I proceed?
Thanks.
Re: Honda Accord 2014 V6 EX-L ECU Number
Posted: Wed Sep 28, 2016 3:48 pm
by Spunkster
What is the whole part number?
Re: Honda Accord 2014 V6 EX-L ECU Number
Posted: Wed Sep 28, 2016 3:52 pm
by HalifaxAccord
Spunkster wrote:What is the whole part number?
37820-5G0-A32
Re: Honda Accord 2014 V6 EX-L ECU Number
Posted: Wed Sep 28, 2016 4:09 pm
by Spunkster
When you enter that part number at:
https://www.hondata.com/flashpro
it shows that it is supported.
Re: Honda Accord 2014 V6 EX-L ECU Number
Posted: Wed Sep 28, 2016 4:12 pm
by HalifaxAccord
I did notice that...however if you look at the app it doesn't list a32 and that's what brought me here.
Re: Honda Accord 2014 V6 EX-L ECU Number
Posted: Wed Sep 28, 2016 4:14 pm
by HalifaxAccord
Also please know I have ensured my software is up to date.
Thanks again
Re: Honda Accord 2014 V6 EX-L ECU Number
Posted: Wed Sep 28, 2016 4:15 pm
by Hondata
App? Where does it show the Accord ECU part numbers?
Re: Honda Accord 2014 V6 EX-L ECU Number
Posted: Wed Sep 28, 2016 4:18 pm
by HalifaxAccord
Hondata wrote:App? Where does it show the Accord ECU part numbers?
When selecting my vehicle type I have to select Accord US AT a32. But only accord us at a16 and a23 are listed.
Re: Honda Accord 2014 V6 EX-L ECU Number
Posted: Wed Sep 28, 2016 4:23 pm
by Hondata
Oh, in FlashProManager (I see that in your first post now). Your vehicle would be under 'Accord V6 AT US 2014'. If the FlashPro is locked to your vehicle and plugged in then FlashProManager will select the right calibration group from the list for you.
Re: Honda Accord 2014 V6 EX-L ECU Number
Posted: Wed Sep 28, 2016 4:29 pm
by HalifaxAccord
Hondata wrote:Oh, in FlashProManager (I see that in your first post now). Your vehicle would be under 'Accord V6 AT US 2014'. If the FlashPro is locked to your vehicle and plugged in then FlashProManager will select the right calibration group from the list for you.
Got it thanks so much!