Hondata

I have a 2005 RSX base model manual transmission with a K24A2 engine swap. I have the Kpro4 ECU, however, my speedometer does not work. I've checked everything else and I have sorta narrowed it down to the ECU/ECU wiring. This has been a problem for 2 months now. Any help?

Does the ECU datalog speed? I'd say to most likely fault is the speed sensor itself.

It hasn't been reading any sensor inputs, so no it doesn't read the speed but it also doesn't read any other values like RPMs for example.

Are you datalogging?

Do I need to plug in the one wire connector with 10 wires inside the ECU and plug the red VSS wire to the white/green VSS wire as shown here: https://www.hondata.com/tech-alternativ ... ngine-swap

I have not tried datalogging

You have to datalog in order to see readings.