Page 1 of 1
vtc issues
Posted: Fri Mar 04, 2016 2:12 pm
by conalmcn
Hi was down for mapping yesterday and run into a few problems when mapping the low cam. The cam angle and the camcmd didn't want to match up. it is on a turbo ep3 uk spec with pra ecu and kpro4 board. I've attached a short datalog
Re: vtc issues
Posted: Fri Mar 04, 2016 2:49 pm
by Spunkster
Please post the calibration as well
Re: vtc issues
Posted: Fri Mar 04, 2016 2:54 pm
by conalmcn
its locked by tuner so cant unfortunately
Re: vtc issues
Posted: Fri Mar 04, 2016 3:10 pm
by Spunkster
You probably need to have the tuner take a look then to see what might be happening.
Re: vtc issues
Posted: Fri Mar 04, 2016 3:48 pm
by conalmcn
It was with him yesterday when it happened. He thinks the vtc solenoid ia faulty. Juat wondering if it looks strange on the datalog.
Re: vtc issues
Posted: Fri Mar 04, 2016 4:05 pm
by Spunkster
It is impossible to really say without seeing the calibration that accompanies the datalog.
They seem to match pretty well in the datalog though.