Hondata

Posted: **Mon Feb 15, 2016 3:14 pm**

Hi there, I have a Fn2 with a stock K24, CT-E, Walbro 255 l/h and DW 1300 CC... Running E85.

I have issues with cold start. What do I need to change in Flashpro, I have read about Water temperature fuel compensation cranking but I don't know what numbers I should use for my setup so it is easy to crank up :)

53F=?
35F=?
0F=?
-18F=?

Help please...

Posted: **Mon Feb 15, 2016 3:37 pm**

You may want to read what others have found at: http://www.k20a.org/forum/showthread.php?t=85056

Posted: **Tue Feb 16, 2016 8:52 am**

Below about 70F E85 needs much more fuel to start.

Posted: **Wed Feb 17, 2016 3:16 pm**

The link you sent only works on Kpro, Flashpro does not have that setting?

Do you think this numbers I wrote will work?

Posted: **Wed Feb 17, 2016 4:21 pm**

You will have to try it and see.

Posted: **Sat Feb 20, 2016 12:40 pm**

What tables shall i change ?

Hondata

Cold start E85 Fn2 problem, help ?

Cold start E85 Fn2 problem, help ?

Re: Cold start E85 Fn2 problem, help ?

Re: Cold start E85 Fn2 problem, help ?

Re: Cold start E85 Fn2 problem, help ?

Re: Cold start E85 Fn2 problem, help ?

Re: Cold start E85 Fn2 problem, help ?