K-Pro/ ECU Fried??
Posted: Thu Feb 04, 2016 11:14 am
Hi everyone, hope someone can help me out!
I have a Honda Civic EP3 Type R (UK) and i have kpro 4. everything has been running fine for a year since being tuned. Couple days ago i decided to change the rocker cover seals along with the spark plug seals. I removed the negative battery terminal first then proceeded to remove the earth for the injectors/ecu off the cylinder head. As i was changing the seals, i noticed very slight milky textured oil in the cover. cover back on, ecu earth back on, then neg battery terminal back on. Plugged my laptop in and kmanager had a update for the firmware so i let that finish. went to start the car and noticed the oil,battery and ecu light staying on. crank the engine and the ecu just clicks like when its uploading a map or something.checked for errors - none. I preformed the security clear,waited a few mins then uploaded my last map. drove fine for a day, next morning its cold - ~3 degrees Centigrade. same problem, oil,battery and engine light. did the security clear thing again. car starts again but this time the car has a weird 100-200 rpm surge even when at constant 2% throttle. when i go to give it a little more gas its really boggy, sputters like cray cray and sounds like really bad misfire.
Any help would be much appreciated!
I have a Honda Civic EP3 Type R (UK) and i have kpro 4. everything has been running fine for a year since being tuned. Couple days ago i decided to change the rocker cover seals along with the spark plug seals. I removed the negative battery terminal first then proceeded to remove the earth for the injectors/ecu off the cylinder head. As i was changing the seals, i noticed very slight milky textured oil in the cover. cover back on, ecu earth back on, then neg battery terminal back on. Plugged my laptop in and kmanager had a update for the firmware so i let that finish. went to start the car and noticed the oil,battery and ecu light staying on. crank the engine and the ecu just clicks like when its uploading a map or something.checked for errors - none. I preformed the security clear,waited a few mins then uploaded my last map. drove fine for a day, next morning its cold - ~3 degrees Centigrade. same problem, oil,battery and engine light. did the security clear thing again. car starts again but this time the car has a weird 100-200 rpm surge even when at constant 2% throttle. when i go to give it a little more gas its really boggy, sputters like cray cray and sounds like really bad misfire.
Any help would be much appreciated!