Page 1 of 1
Uploading from the s300 Hondata to a new Laptop
Posted: Mon Dec 07, 2015 2:27 am
by TazStorm
I am new to using the HONDATA s300. I just purchased a new laptop. I would like to download the ECU calibration to my laptop. What is the correct way to do this and not mess things up. Do I just connect the USB cable to the laptop and then to the ECU and it automatically does this, Please advise. Thank you for your help in advance.
Re: Uploading from the s300 Hondata to a new Laptop
Posted: Mon Dec 07, 2015 8:25 am
by Hondata
In SManager save your calibration to a USB stick, or email it to yourself. On the new laptop load the calibration from whatever you transfered it to.
Re: Uploading from the s300 Hondata to a new Laptop
Posted: Mon Dec 07, 2015 1:52 pm
by TazStorm
I have never had the calibration on a laptop or on a thumb drive, the shop that tuned my setup has it. I am tring to get the tune for my self. My tuner does not want me to have it. I was however, informed there is not a password lock.
Re: Uploading from the s300 Hondata to a new Laptop
Posted: Sat Dec 12, 2015 9:55 pm
by TazStorm
Is there a way to upload directly from the ECU to my laptop and save the tune with out contacting the tuning shop?
Re: Uploading from the s300 Hondata to a new Laptop
Posted: Sun Dec 13, 2015 8:57 pm
by Hondata
What s300 do you have?
Re: Uploading from the s300 Hondata to a new Laptop
Posted: Sat Jan 02, 2016 2:08 pm
by TazStorm
I have the S300 v3.
Re: Uploading from the s300 Hondata to a new Laptop
Posted: Sat Jan 02, 2016 2:54 pm
by Hondata
In SManager with the s300 plugged in see if the calibration is under the s300 window. If not, then it was not saved to the s300 when uploaded.
Re: Uploading from the s300 Hondata to a new Laptop
Posted: Tue Jan 12, 2016 9:31 am
by TazStorm
Got it. Thanks for your help on this.